Drum Top Gaskets / Gaskets for Drum Locking Ring
The Drum Top Gaskets are widely used in Open Head Steel, Plastic and Fibre Drums. They are made from FDA compliant materials and available in polymers like EPDM, NITRILE, SBR, FKM(Viton) & VMQ(Silicone).
At Amber Group, we have Standard and Non-Standard Sizes for Drum Top Gaskets. Moreover, we strive to provide next level service to our customers. Our customers can directly purchase from one of the largest inventories in the Drum Seal Industry.
Features
• The leak proof property of Drum Top Gaskets makes it ideal for the packaging industry.
• Drum Gaskets are Vulcanised Joint as per required length.
• These gaskets are compatible with Food Contact applications.
• The Weather Resistance property of drum gaskets makes them perfect for open air drums
• These Drum gaskets are odorless.
Benefits of Drum Top and Pail Gaskets from Amber Group
EPDM Drum Top Rubber Gaskets eliminate leakage issues through
• Greater resistance to Ozone,
• UV Rays,
• Oxidation and
• Extreme weather
EPDM Drum Top Rubber Gaskets leads to save on the financial losses that may incur due to
• Spillage
• Loss of Material
• Claims from customers
• Claims from Environmental Authorities
EPDM Drum Top Rubber Gaskets Ensures Health Safety
• It approves FDA for repetitive use for packaging, storage and transporting food & pharmaceutical ingredients.
Drum Gaskets are mainly made in EPDM Rubber. However, we do manufacture Drum Gaskets in other Rubbers to meet the exact packaging needs of our client.
1: Good, 2: Fair, 3: Poor
Material | Density Range (g/cm3) | Hardness Range (Shore A) | Ozone | Compression | Weather Resistance | Odur | Application |
---|---|---|---|---|---|---|---|
EPDM | 0.6 - 0.9 | 15 - 30 | 1 | 1 | 1 | 1 | Water, Alkalis, Acids and Oxidants |
NITRILE / NBR / Buna N | 0.6 - 0.9 | 15 - 30 | 2 | 2 | 2 | 1 | Oils, Solvents, Gasoline, Petroleum based Fluids |
SILICONE | 0.6 - 0.9 | 15 - 30 | 1 | 1 | 1 | 1 | Food Contact Applications, Low Temperatures |
SBR | 0.6 - 0.9 | 15 - 30 | 3 | 1 | 3/2 | 1 | General Purpose |
Natural | 0.6 - 0.9 | 15 - 30 | 3 | 1 | 3/2 | 3/2 | Water, Alcohol, organic salts, alkalis |
All Standard and Non-Standard Drum Top Gasket Sizes
Type | Drum Capacity | Dimension (mm) | Length (mm) |
---|---|---|---|
Rubber Sponge Cord | 30 Litres / 8 Gallon | Diameter: 10.00 (± 0.5) | 750/780/805 |
Rubber Sponge Cord | 40 Litres / 10 Gallon | Diameter: 10.00 (± 0.5) | 750/780/805 |
Rubber Sponge Cord | 50 Liters / 13 Gallon | Diameter: 10.00 (± 0.5) | 750/780/805 |
Rubber Sponge Cord | 60 Litres / 15 Gallon | Diameter: 10.00 (± 0.5) | 1020/1035/1050 |
Rubber Sponge Cord | 120 Litres / 30 Gallon | Diameter: 11.50 (± 0.5) | 1230 |
Rubber Sponge Cord | 210 Litres / 55 Gallon | Diameter: 11.50 (± 0.5) | 1420/1430 |
Rubber Sponge Cord | 265 Litres / 70 Gallon | Diameter: 8.00 (± 0.5) | 805 |
Rubber Tubular/Hollow Rubber Tube (Solid Rubber) | 210 Litres | ID: 7.5 OD: 9.00 | 1830 |
Rubber Cord | 20 Litres Pail | Diameter 2.50 | 830 |
Rubber Sponge Strip | 80 Litres | Width: 10.50 Height: 4.50 | 750 |
Rubber Tubular Gasket | Pail Drum | ID: 3.80 mm OD: 6.35 mm | 915 |
Rubber Sponge Trapezium | 210 Litres | 4.00 x 14.00 x 9.50 | 1800 |
Rubber Sponge Square | 210 Litres | 11.50 x 11.50 | 1800 |
Rubber Sponge Half Round (Closed Cellular Sponge) | 210 Litres | 9.50 x 13.50 | 1820 |
Rubber Sponge C Shape (Closed Cellular Sponge) | 210 Litres | 1750 |
Explore More Products
Drum Closure Gaskets / Washers
Rubber Tubing
Rubber Cords
Custom Extruded Rubber Products
Frequently Asked Questions
Do Amber Group produce Rubber Gaskets for 25 Litres Open Head Drums?
Why does the Drum Leak or Why is there spillage in the Drum?
Chemical Attack:
Depending upon the chemical content of the Drum, the Drum Top Gasket may crack, discolor, blisters or swell. Some chemicals may react with certain polymers and damage the Drum Top Gasket. It is important to select the right Polymer material to ensure the Gasket is compatible with the content of the Drum.
Compression Set or Recovery percentage:
The Drum Top Gasket has taken on permanent “set” which means it is unable to recover to its original shape after removal or loosening of Drum Top or deforming stress. Selection of right polymer material and compound with low compression set or higher recovery percentage will extend the serviceability life and avoid leakage or spillage.
Ozone Attack:
Tiny traces of ozone in the air attacks double bonds in rubber chains leading to degradation and further to deeper cracks on the surface. Natural Rubber, SBR & Nitrile Rubber are more prone to degradation due to ozone attack. Amber Group therefore recommends using EPDM Rubber Drum Top Gaskets to prevent ozone failures.
High Temperature:
Unless required in the process of Drum manufacturing, The Drum Top Gasket is often required to pass certain temperatures. Physical and chemical changes can occur to the Polymer material at high temperatures that can result in crack, permanent set. Selecting the right Polymer material which sustains at elevated temperatures will extend the serviceability life, which will avoid leakage or spillage.
Installation Damage:
Damage caused while inserting the Gasket on the Drum Top can be identified by notch or cut on the surface of the gasket. Correct methods or tools are required to install the gasket on the Drum top which will avoid such damages and prevent leakage or spillage.
Incorrect size of the Drum Top Gasket:
At the time of product selection, if one selects the wrong size of Drum Top Gasket it will lead to leakage. Please ask our experts to provide the right product which fits perfectly in your drum top groove.
Do Amber Group produce Rubber Gaskets for Pail Drums?
Our customers can connect with our team for Rubber Gaskets for any type of Container i.e. Plastic or Metal, whether it be Pail, Open Head Drum, Close Mouth Drum, Narrow Mouth Drum, IBC,. Amber Group specializes in all types and sizes of Gaskets/Washers for Packaging.
We are looking for FDA Compliant Drum Top Gaskets?
Amber Group produces Drum Top Gaskets meant for the use in Food Packaging applications. Our Drum Top gaskets are tested in compliance with US Code of Federal Regulations CFR 21, 177.2600 which specify:
- Rubber articles intended for repeated use in Packaging.
- Rubber articles must meet extraction criteria in distilled water and N-Hexane.
Can Amber Group produce Drum Top Gaskets with Vulcanized or Molded Joints?
Amber Group produces Drum Top Gaskets which are Vulcanized or Molded Joints. These Gaskets are extruded in required size or shape and then mold joint as per required length.
Do you manufacture Tubular Gaskets for Open Top Drums?
What Drum Top Gasket material should I use for my application?
Depending on the packaging needs of the client, there are a wide variety that can be chosen for Drum Top Gaskets.
Please check the below table for material selection:
Material | Density Range (g/cm3) | Hardness Range (Shore A) | Ozone | Compression | Weather Resistance | Odour | Application |
---|---|---|---|---|---|---|---|
EPDM | 0.6 – 0.9 | 15 – 30 | 1 | 1 | 1 | 1 | Water, Alkalis, Acids and Oxidants |
NITRILE / NBR / Buna N | 0.6 – 0.9 | 15 – 30 | 2 | 2 | 2 | 1 | Oils, Solvents, Gasoline, Petroleum based Fluids |
SILICONE | 0.6 – 0.9 | 15 – 30 | 1 | 1 | 1 | 1 | Food Contact Applications, Low Temperatures |
SBR | 0.6 – 0.9 | 15 – 30 | 3 | 1 | 3/2 | 1 | General Purpose |
Natural | 0.6 – 0.9 | 15 – 30 | 3 | 1 | 3/2 | 3/2 | Water, Alcohol, organic salts, alkalis |