Rubber O-Rings are technically used to block a path which may allow a liquid or gas to escape. From Cars to Cameras, these Rubber O-Rings are endlessly used.
At Amber Group we have Standard and Non-Standard Sizes for Rubber O-Rings. We also make Customized Rubber O-Rings as per specific application and requirement.
Features
- Rubber O-Rings are delivered faster.
- Rubber O-Rings are available in Hardness ranging from 10 – 90 Shore A.
- Rubber O-Rings are made for Static and Dynamic applications.

Rubber O-Rings majorly are made in materials shown below, but we do make Rubber O-Rings in most of the available Elastomer/Rubber.
1: Good, 2: Fair, 3: Poor
Material |
Standard Temperature Range (°C) |
Ozone |
Compression |
Weather Resistance |
Odur |
Application |
---|---|---|---|---|---|---|
EPDM |
-40 to +135 |
1 |
1 |
1 |
1 |
Water, Alkalis, Acids and Oxidants |
NITRILE / NBR / Buna N |
-40 to +125 |
2 |
2 |
2 |
1 |
Oils, Solvents, Gasoline, Petroleum based Fluids |
VMQ/ SILICONE |
-65 to +200 |
1 |
1 |
1 |
1 |
Food Contact Applications, Low Temperatures |
FKM/ VITON |
-25 to +230 |
1 |
1 |
1 |
1 |
High Temperature Resistance, High Chemical Resistance, Oil Resistance, Fuel Resistance |
CR/ CHLOROPRENE/ NEOPRENE |
-40 to 120 |
2 |
2 |
2 |
1 |
Good Weathering Resistance. Flame retarding. Moderate Resistance to petroleum based fluids. |
LDPE (Polyethylene) |
-50 to +80 |
2 |
3 |
3 |
1 |
Excellent for Dilute and concentrated acids, alcohols, bases and esters. |
PTFE (Teflon) |
-240 to +210 |
1 |
3 |
1 |
1 |
Non-reactive and ideal for use with most chemicals. |